Maintaining your Airchamber

We strongly advise that the following maintenance practices be carried out every 3 - 4 months. Your storage conditions as well as the frequency in which you drive your vehicle will dictate whether these practices should be carried out more often.

1. With the power supply turned off, remove and clean the electrostatic filters in warm soapy water to remove any accumulation of debris and dirt, then rinse in clean water. Allow to dry fully before reinstalling as excess moisture can reduce the life of the fans over time.

2. Carefully lubricate the zippers. Furniture polish containing beeswax is ideal. An aerosol can is most easiest and convenient.

3. Clean any fluids that have dripped onto the base mat and sweep out any leaves/debris. Carefully check for small stones or gravel as these can wear out or even puncture the base mat.

4. With the exception of cleaning the filters, leave the fans on all the time… even when out in your car! The fans are designed for continual use and the practice of turning them on and off frequently can reduce life span.

5. The outside of the chamber can be wiped down with a clean microfibre cloth dampened with clean water if needed. It can be dried with a clean chamois or clean dry microfibre cloth. Its best to do this while you are letting your filters dry.

To read the full Airchamber warranty policy, click here

For more information please see our FAQs